How to build your own PC in 2023 — the right way

Thermaltake Core P5
Thermaltake Core P5 (Image credit: Rich Edmonds / Windows Central)

Building a PC remains a daunting endeavor for many, but it doesn't have to be. Even if you've yet to pick up a screwdriver and toss together a few components, this comprehensive guide will make you a PC building master in no time at all. We'll also save you money in the process.

Picking the right parts

Intel Motherboard

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

The most crucial part to get right is picking parts that do what you want and working with each other. Choosing wrong or incompatible PC parts may cause issues, damage to other components, or require time for returning said products to retailers. In short, we'll need a case, processor (CPU), graphics card (GPU), RAM, power supply (PSU), motherboard, cabling, and some storage to complete the barebones checklist.

Looking inside a PC case can reveal a mess of electronics to someone who doesn't know what does what. We can lend a helping hand when it comes to picking the right parts, even if you don't know the difference between a CPU and a GPU. Check out our best guides for each component and then check for incompatibilities using our brief checklist below.

Products used in this guide

Compatibility

GPUs

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

Here's what you'll need to build a PC:

  • Case: Cases come in different form factors, depending on the size of the PC you wish to build. Less important overall.
  • PSU: This is what converts AC to DC power from your home socket to components. Needs to supply enough stable power (500W is usually a good place to start).
  • CPU: You have the choice of AMD and Intel for desktop processors. Take a look at our best guide and note the sockets they use as you'll need to match the socket for the motherboard.
  • Motherboard: A motherboard simply needs to match the same socket type of the CPU. Chipset and other features are all down to pricing and preference.
  • RAM: Faster frequencies and lower latencies generally mean better the RAM, though you'll need to make sure your motherboard can support the same clock speed, or it'll be limited. Most new boards support DDR4 or DDR5. DDR4-3200 or DDR5-4800 is a safe bet for most CPUs.
  • Storage: Entirely down to personal requirements, though we always recommend an SSD for installing the OS.
  • GPU: This is optional and is only really needed if you plan to do some gaming or intensive workloads. In that case, spend as much as you can.

But wait! Even after double and triple-checking that everything will place nicely together, it's recommended you use an automated tool that checks entered components against a database to confirm that there are no conflicts. It's worth visiting PC Part Picker, entering in all your components, and then checking everything over.

Not only does the website allow for comparison between other options available — potentially allowing for even more savings to be made — it will also provide warnings for any issues detected. After a few PC builds, you'll be able to tell components apart by just looking at the specs and streamlining this process without using such websites.

All the products in this guide are compatible with one another so if you fancy building yourself a capable gaming PC, take up our recommendations as you move through the guide.

Trusted tools

Anti-static Wristband

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

Some tools you'll need to build a PC include the following:

  • Toolkit.
  • LED light source.
  • Flat workspace (no carpet).
  • Anti-static mat.
  • Anti-static wristband.
  • Magnetic parts tray.
  • Free workspace (never use carpet to prevent frying your components).

Did I mention you shouldn't use carpet to build a PC?

How to build a PC

We've arranged this guide in an order that makes sense for most builds, though it may not be optimal for every PC. You'll need to check the layout and see which components will need to be installed first, but usually, starting with the power supply is the best way to go. You'll first want to put aside the box/bag of screws that come with the case as we'll need these for the steps ahead.

Just be sure to check our helpful guide on how to avoid these rookie PC building mistakes so you can get up and running in no time at all.

When putting together a new PC, you'll need a case that looks good, is sturdy enough to hold everything inside, has ample features like dust filtering, smart RGB lighting, and doesn't break your budget. This sums up the Lian Li PC-O11 Dynamic perfectly.

Installing the CPU

AMD Ryzen 9 3900X

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

You'd have noticed I said we'll be installing the PSU first, but that's only when we're sure everything works. Before we fit everything inside the PC case, we'll need to check all our components actually work out the box. Instead of throwing everything inside the case and discovering there's an issue, unpacking everything on your chosen flat surface and installing a few components to test is the best way to go.

Unpack your PSU, CPU, RAM, and motherboard for this. The first step here is to install the CPU, which requires you to remove the motherboard from its packaging too. This is a super-easy process, regardless of whether you're rocking an AMD or Intel chip.

  1. Unpack the motherboard from its packaging.
  2. Place the motherboard atop its cardboard box. (It's safe here. Never place on carpet.)

Motherboard

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)
  1. Open the CPU latch.
  2. The plastic cap will pop off once we install the CPU. Keep this safe! Just in case you need to return the motherboard to the manufacturer.
  3. Insert the CPU, matching notches and indicators to the socket. (Do not apply pressure, it should lie flush without force.)
  4. Close the latch to secure the CPU. (This step will require some amount of pressure, popping off the plastic cap.)

Intel CPU Paste

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

Now, we'll need to install the CPU cooler. Depending on the cooler you've purchased, you may have a layer of thermal paste already applied. If not, we'll need to do this before installing the cooler. (Tip: less is more.) The manual will run you through the process of installation, which can vary between coolers and manufacturers.

Especially with aftermarket coolers — both water and air — you'll need to pay close attention to the manual that comes with the product. This is why it's better to do all these steps with the motherboard outside the PC case for easier handling.

After many years of falling behind Intel, AMD has come leaps and bounds with Ryzen, and this latest generation is even better. There has never been a better time to hop over to team red, and the Ryzen 5 5600X is the perfect entry point for most PCs. There's even an included cooler to get you up and running.

Installing the RAM

RAM

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

RAM is a sensitive component and, as such, should be handled with care. It's recommended that contact be avoided with the pins on the underside of each module. The RAM slots on a motherboard are located to the right of the CPU. Do check the motherboard manual as to which RAM slots are to be used, depending on how many sticks you have.

  1. Unclip the RAM locks on the motherboard module slots.
  2. Match the RAM module notches to those found in the slots on the motherboard.
  3. Insert the module carefully, using light even force across the stick.

RAM

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)
  1. After it inserts into the slot, push down on either side of the RAM module until it securely clicks into place.

How to install RAM

It's vital to choose RAM that will be best matched with the motherboard and CPU, and this 3200MHz kit is excellent for the Ryzen 5 5600X and accompanying motherboard. There's also room for some tuning at a later date when you need a little more from your system memory.

Check everything works

NZXT M7 Z490

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

With the CPU and RAM installed, the motherboard is now ready to boot. If you're using a Ryzen or Intel CPU without integrated graphics processing (our 5600X is one such CPU), we'll also need to install our GPU here to get an output from the motherboard.

Unpack the GPU from its box and carefully seat it into the top-most PCIe slot. Press down until you hear it click. The GPU should be fine sat atop of the motherboard, but you may need to allow the backplate to hang over the edge of the motherboard box so it can lie flush with the board itself.

All we require now is power. Reference your motherboard and PSU manuals to sort through the right cables and connectors.

  1. Hook up the main 24-pin ATX cable to the PSU and motherboard (it's the largest one in the bundle).
  2. Connect the CPU ATX power cable (usually a 4+4 pin connector, some motherboards take two or three) to the PSU and motherboard.
  3. Install any PCIe power cabling for the GPU if it requires it.
  4. Connect an HDMI or DisplayPort cable to an available port on your GPU (or motherboard if your CPU has an integrated GPU).
  5. Plug in a keyboard to a free USB port on the motherboard.

Usually, to turn on a PC, you'll want to hit the power button, but since our PC is not technically inside a case yet, we have no power button. Luckily, we don't require the power button to turn everything on. We can emulate a physical button by simply using a screwdriver to create a bridge between the to POWER_SW pins on the motherboard.

Msi Mpg Z690 Carbon Wifi

Source: Daniel Rubino / Windows Central (Image credit: Source: Daniel Rubino / Windows Central)

Again, consult your motherboard manual to locate these pins. By simply making contact with the + and - pins for POWER_SW we're telling the motherboard to turn the system on. It's precisely what happens when you hit the power button on your PC case. Give it a few attempts if you can't quite make the connection between the two pins.

If everything boots through the BIOS and you see the splash screen, go into the setup by hitting the DEL key as the system cycles. Check that all your RAM is registered here. All good? Shut everything down and disconnect all the cables, removing the GPU and placing it back into its protective wrapping. It's now time to install the PC inside the case.

Installing the PSU

PSU

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

The PSU is the most critical component of any PC. It provides the juice required for all the computing magic to take place. Depending on the case you've purchased, we'll need to install the unit with the fan facing up or down. To determine which is most optimal, check if you have a vent at the bottom of the case. If so, face the PSU fan downwards.

You'll want to have all your cables connected to the PSU prior to installing it to make your job easier. Depending on the PSU you've purchased, it may be one of the following:

  • Fully modular: No cables are permanently connected to the PSU.
  • Semi-modular: Some cables are permanently fixed, usually ATX and CPU power.
  • Non-modular: Every cable is connected and cannot be removed from the PSU.

Fully and semi-modular PSUs are the easiest to work with as you'll have an easier time making sure all cables look neat and tidy.

  1. Slide the PSU into the mounting area with the fan facing up or down.

Lian Li O11 Dynamic Mini

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)
  1. Screw in the bundled screws (should come with the case) in the four holes at the rear of the case.
  2. Ensure the unit is switched off using the rear switch.
  3. Plug the PSU into a power socket to ground the PC.
  4. Bind all the power cables coming out of the PSU together and put them to one side.

The PSU is the most critical component inside your PC case. It's what provides power to all other components and, as such, should be able to supply a reliable current. You can trust this PSU to provide clean, stable power.

Installing the motherboard

With the CPU, the cooler, and RAM modules installed, the motherboard is ready to be screwed to the backplate inside the case. First, we need to install the I/O shield, a long piece of metal that has cutouts for all the rear ports and connections. This is optional, but recommended accessory helps provide electromagnetic interference (EMI) protection.

  1. Place the I/O shield to the rear cutout in the PC case and click into place. (Skip this step if it's attached to your motherboard.)
  2. Hover the motherboard atop the backplate to see where standoffs need to be screwed in. Different sizes need different holes.Standoffs are the screws that are installed on the motherboard backplate, which then allows the motherboard to rest atop them and for screws to secure the board. Some cases have them pre-installed.
  3. Install the standoffs for the motherboard, if not already pre-installed. (Some backplates may feature ATX labels next to holes to guide you.)
  4. Lower the motherboard onto the standoffs.

Motherboard

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)
  1. Tighten the screws, but do not overtighten them — just enough to secure the board in place.
  2. Check the sides of the motherboard by lightly pulling to make sure every inch has been secured.

Motherboards allow for the CPU, memory, storage, GPU, and all other components to communicate with one another, and the ASUS X570-E Gaming is a great solution. It's reliable, houses premium parts, has a ton of features, and has a solid UEFI setup that allows you to overclock your system easily.

Installing storage drives

SSD

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

Storage drives are essential devices that hold not only the operating system but also all programs, personal media, and all other data. It's recommended to use an SSD (be it M.2 or 2.5-inch) drive for the primary OS partition, which enables quick booting and reliable performance. Data can be stored on traditional (3.5-inch) mechanical drives.

M.2 PCIe NVMe drives are the fastest with SATA M.2 and 2.5-inch drives coming in second. 3.5-inch drives come in last for speed but are the most affordable, especially at higher capacities.

Depending on the case and how drive bays are configured, M.2, 2.5- and 3.5-inch drives may be able to be installed at the same points or using dedicated brackets. Be sure to double-check the PC case manual. We'll go over how your PC case may have both configured below.

M.2 SSD

  1. Unscrew and remove the M.2 SSD plate, if your motherboard has one.
  2. Install a standoff for the M.2 module, if not already installed.
  3. Place the M.2 drive atop of the slot and secure it with a screw.

ASUS ROG Maximus Z690 Hero

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)
  1. Re-install the M.2 plate (if applicable).

2.5-inch SSD

Some cases will simply allow you to screw in a 2.5-inch drive to a bay that also supports larger 3.5-inch drives, though more modern PC cases allow you to use brackets to the rear of the motherboard tray. For the latter:

  1. Take the SSD bracket and attach the drive to it, lining up the screw holes.
  2. Screw in the drive using appropriate screws.
  3. Attach the bracket and secure it to the case.

3.5-inch HDD

  1. Extract the HDD bracket from one of the bays.
  2. Slide the mechanical drive into the bracket.
  3. Secure the drive to said bracket using screws or screwless mechanism.
  4. Slide the bracket and drive back into the bay.

Since the ASUS motherboard we selected has M.2 support, we can opt for a super-fast SSD. Samsung's latest 970 EVO Plus is incredibly fast, perfect for both Windows 10 and games. With 500GB, you'll be able to install the OS and then a few programs and games too, though if your budget can stretch it, we'd always recommend installing games on a different drive to the OS.

Plugging everything in

With all significant components now installed, it's time to hook everything up to the power supply and motherboard. Generally speaking, it's best to start with the power to the motherboard itself.

  • Motherboard: The PSU has multiple cables for the board: 24-pin ATX and 8-pin CPU — the same cables we used earlier to test the motherboard, CPU, and RAM. Route these behind the backplate, using available grommets and cutouts.
  • Storage drives: Most SSDs and HDDs today use SATA connectors. These are 15-pin flat connectors with a dip on one side to prevent plugging them in the wrong way. Route these from the PSU to the drive bays and mounts, using more than one lead from the PSU if required.

PSU Cable

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

Next, we need to connect the storage drives to the motherboard, using SATA data cables. These are mostly smaller versions of their power siblings that carry data instead. The motherboard usually has SATA ports located to the lower-right hand-side. It doesn't matter which ports are used. Much like the power cables, route these through cut-outs and grommets to the drive bays and mounts.

We now have power to our storage drives and the motherboard, as well as data channels between drives and the mainboard. All that's left is to connect front panel I/O and other optional connectors (front panel USB, HD audio, etc.). Connecting the front panel I/O, which includes the power switch, reset switch, HDD activity LED, and power LED can be a tricky step.

These pins stand up from the motherboard, which requires a careful approach when plugging in the small connectors. The motherboard manual should provide information as to the layout of these pins and what they correspond to — though usually the below layout is used:

Motherboard I/O

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

The front USB 3.0 and HD audio pins can be located on the motherboard. Again, refer to the manual for exact placement as not all motherboards are created equal.

Adding case fans

For added cooling capacity (and room for overclocking or more stable operation), throwing in an extra fan or two is worthwhile. PC cases may come with fans pre-installed, but if not, it's simple to screw them into fan mounts. Just be sure to align them correctly and have the blades pointing the correct way. Fans can have small arrows on the side that show which way the blades spin and where airflow will be directed.

Corsair Fans

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

Note: some cases may require you to install fans before inserting the motherboard, especially for the top exhaust. Fans can either be plugged into a motherboard or into the PSU directly using an adapter. We'd always recommend the motherboard due to the ability to control the fans intelligently depending on system temperatures.

Fan headers can be located on the motherboard itself, where the 3 (or 4) pin connectors can be inserted.

Installing a GPU

NVIDIA GeForce RTX 3070 review

Source: Harish Jonnalagadda / Windows Central (Image credit: Source: Harish Jonnalagadda / Windows Central)

Need some extra power for gaming and intense workloads? The best graphics card is a must-have. As a bonus, it's straightforward to install a graphics card. We usually leave the GPU until last because of how much space they typically take within the chassis.

  1. Unscrew the rear PCI case brackets that align with the PCI slot you will use.
  2. Check that the motherboard GPU card latch is open.
  3. Line up the GPU to the PCIe slot on the motherboard.
  4. Carefully insert the card and push down once it has made contact with the slot, listening out for a click of the latch securing.
  5. Use the rear bracket screws to secure the GPU to the PC case for added stability.

Lian Li Lancool 205 Mesh

Source: Windows Central (Image credit: Source: Windows Central)
  1. If the GPU requires additional PSU power, connect the necessary cables.

It has 10GB of GDDR6X memory, can boost to 1710MHz or so, and can even do some 4K gaming if you don't mind seeing sub-three-digit frame rates. This is one of the best GPUs you can buy today.

Power up

Inside PC

Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central)

All that hard work will now pay off. It's time to boot up the PC and make sure everything is working fine now that all components are inside the case. Switch on the PSU and hit the power switch. You should now be greeted by the BIOS POST screen, asking for an OS to be installed if one is not detected. You'll now need to follow OS installation instructions. If you run into problems, it's time to do a little troubleshooting.

Diagnose common PC problems

Rich Edmonds
Senior Editor, PC Build

Rich Edmonds was formerly a Senior Editor of PC hardware at Windows Central, covering everything related to PC components and NAS. He's been involved in technology for more than a decade and knows a thing or two about the magic inside a PC chassis. You can follow him on Twitter at @RichEdmonds.